SLS Nylon PA6 3D printing material
SLS

SLS Nylon PA6

Material details

Nylon PA6 is a strong and heat-resistant material commonly used to print strong and functional parts.

PA6 is the stiffer, stronger SLS nylon: tensile strength of 66–74 MPa against 46–51 MPa for PA12, and about twice its flexural modulus. The trade-off: it absorbs more water and stretches far less before breaking (2–4% elongation against 18–25%). For most parts, SLS Nylon PA12 is the default.

See also: SLS Nylon PA12

  • Family Nylons
  • Accuracy 0.3 mm
  • Min. wall 0.8 mm
  • 2 finishes
  • 3 colors

Technical properties

Tensile strength
66 – 74 MPa
Tensile modulus
3457 – 3700 MPa
Tensile elongation
2 – 4%
Flexural strength
90 – 100 MPa
Flexural modulus
2842 – 3350 MPa
HDT
189 – 192°C

Finishes

  • Mineral Filled

    Anthracite mineralfilled SLS Nylon featuring a slighly coarse matte surface and increased strength.

    1 color

  • Raw

    Raw SLS Nylon PA6 featuring a coarse surface.

    2 colors

Have a design to sell in SLS Nylon PA6?

Upload it once, set your designer fee, and a portal near each buyer prints and ships it. Buyers get the object, never your file.

Sell it on Teleport

Need a part printed in SLS Nylon PA6?

Send us the file and what you need; we come back with a quote from a manufacturer that prints this material.

Ask for a quote