SpaceX Super Heavy Booster B4 + OLP — 1:200 Replica
by AstroNot
€131.98
Checking today's price…
Price includes printing, shipping and the designer's fee.
Getting bulk prices…
One delivery for all units. Different products printed together share the manufacturer's minimum and the delivery too.
Getting bulk prices…
One delivery for all units. Different products printed together share the manufacturer's minimum and the delivery too.
Arrives around 25–26 Nov
The 9 parts, at true size
Drawn to scale from the sizes in the designer's files.
PLA Standard · Gray Metallic
- 47 × 47 × 39 mm Gray Metallic
- 45 × 45 × 98 mm Gray Metallic
- 47 × 47 × 89 mm Gray Metallic
- 45 × 45 × 81 mm Gray Metallic
- 47 × 47 × 29 mm Gray Metallic
- 11 × 4 × 18 mm ×4 Gray Metallic
- 6.1 × 6.1 × 13 mm ×33 Gray Metallic
- 104 × 90 × 81 mm Gray Metallic
- 73 × 73 × 16 mm Gray Metallic
Pick a color for any part: the sheet shows it at once and the price above is for the whole product in those colors.
Lost or broke a piece? Order just that part.
Delivered on its own, in the color and size shown.
Choose the part in the list above or on the sheet.
What you get
- Size
-
Largest piece 10.4 × 9.0 × 8.1 cm · 44 pieces
- Sold as
- A set of 44 pieces
- Material
- PLA, Standard finish, FDM 3D printing
- Made to order
- Printed after you order by a professional 3D printing manufacturer. You choose which one at checkout, based on price and delivery.
- Delivery
- Printed and delivered in 9–10 days · arrives around 25–26 Nov
- If something goes wrong
- Cancel for a full refund before printing starts. Printed wrong or damaged? Tell us within 7 days with a photo and we reprint or refund. Delivery and returns
- Your design stays private
- You receive the object, never the file. The file goes only to the manufacturer printing your order. How files are protected
Print quality and color
- Accuracy ±0.3 mm
- Smallest wall 1 mm
Printed layer by layer from a spool of PLA. Flat areas come out smooth; curves and overhangs show fine steps between layers, like the finish photo.
- Good for
- everyday objects, holders and clips, display pieces
- Not for
- parts left in a hot car or dishwasher, food contact
The object is the color of the filament all the way through, with a matte to satin surface. Photos are the designer's own prints and may differ slightly. Dark colors hide layer lines; white and translucent show them more.
About this product
The Super Heavy Booster B4 (1:200 scale), the workhorse first stage that lifts Starship to orbit. Includes the LOX + methane tank stack, interstage, four grid fins, the AFT section with all 33 raptor engines, plus the Orbital Launch Mount (OLP) base — the launch stand the booster sits on at takeoff.
Original 3D model by AstroNot — https://www.thingiverse.com/thing:4930612 — reproduced on Teleport with full credit. License terms apply per the original Thingiverse upload.
Print notes: the B4_AFT_With_Raptors part is the largest single component (~20 MB). The four grid fins and 33 raptor engines print as separate small parts at higher quantities — set on the part's quantity field after order.
Assembly: superglue for tank/interstage seams, individual raptors press-fit into the AFT engine cluster. Pairs with the matching Starship S20 product to make the full launch stack.
Meet the designer
- United States
- Member since May 2026
- 2 products
Hobbyist 3D modeler. Original author of the SpaceX Starship + Super Heavy Booster (1:200) model on Thingiverse — https://www.thingiverse.com/thing:4930612. Reproduced on Teleport with full credit.
You may also like
No photo yet
Original Elven Mage Statue – Fantasy Collectible
Standard Resin Off-White In 45 colors
No photo yet
No photo yet
No photo yet
Psyduck on a Flamingo Float Figure
by Kenji Arai
Standard Resin Gray In 45 colors
Customize part dimensions
Edit any dimension below. All dimensions will scale proportionally to maintain the part's shape.
